SUN VOYAGER 28 Specification


Handmade with glass-polyester laminate (isophthalic resins and gelcoats, powder mats and powder fabrics). Colours: hull wine red RAL3003. Yellow plastic film decoration on the boards.


Made with sandwich technology, colour: beige RAL1015.
Fittings (316 AISI stainless steel): bow basket, hand rails on the roof, stern half-baskets, life buoy fixing, four stainless steel mooring cleats, small mast for the 360 motor light. Under the fittings and the equipment installation points laminate layer is additionally thickened up to 10 mm.
Navigational lights: red/green bow light, 360 , white stern light, motor light,
Reeling bands: two on the bow, one by the helm
Two closed lockers
Closed cover for the engine compartment
Sliding hatch cover with the plate made of plexiglas
Bow gangway with gas servo + door made of Plexiglas
Anchor container, folding anchor 10 kg, 30 m anchor rope

Engine and steering

Outboard or inboard engine 10-30 HP ( customers choice ),
Helm with steering wheel and remote control outside ( mechanical steering )
Engine protecting groin on the boat's bottom before the engine.


Made with high quality marine plywood, finished with light oak; spray varnished with semigloss polyurethane.

Main cabin - saloon. Bow double berth, side berth, table for 5 persons, 8 big windows made of 8 mm plexiglas. Demountable seat back-rest on the bow berth, the step by bow gangway.

Pantry - laminated module made of gelcoat (stone imitation), including sink with outboard water outlet through cut-off valve. Fresh water from l tank. Complete gas installation: 2-flame gas cooker, reducer, ventilated gas bottles container from cockpit accessible, without gas bottle. Lockers under the seats, shelves, 3 cupboards, drawer, fire-extinguisher.

Toilet - chemical WC, sink with fresh water, opened porthole.

Stern cabin - double berth, 2 windows, opened round porthole, locker under the berth, 3 cupboards, 2 technical lockers

Electric installation 12 V: 75 Ah marine battery, main switch, fuse panel, lighting: four lamps in the saloon, one lamp in the toilet, two lamps in the stern cabin, bilge pump, two 12V sockets: by helm and in the stern cabin.
At the time of publishing, all information regarding the model and equipment are up to date. The manufacturer retains the right to alter the construction or equipment details to improve the product. The constructor retains the right to make alterations in construction and fitting out as required.
Notice: The photos above may show variations and details that have been made to clients special wishes and are not included in the standard delivery package.